How to Maintain Floor Scrubber Dryer

How to Maintain Your Floor Scrubber Dryer – Maintaining cleanliness is always the main point to maintain our health. 

Whether it is the cleanliness of our home or the work environment, it is very important to ensure that our environment is far from bacteria that can carry diseases. 

And for that reason, the use of cleaning equipment is also becoming more and more popular due to its effectiveness and capabilities to ease our job in cleaning the house or office. 

And one of the cleaning equipment that is widely used is the floor scrubber dryer.

But, do you know how to maintain a floor scrubber dryer machine so that it will keep its optimal performance in cleaning our home or office?

Let’s see a complete explanation that has been summarized by dimulti.id!

How to Maintain Floor Scrubber Dryer

The floor scrubber dryer is a multi-functional machine that has various complex components, so it is important to maintain its use properly. 

To ensure the machine’s performance remains optimal and lasts a long time, there are several steps that need to be considered. 

Apart from following the manufacturer’s instructions for proper use, you must also routinely clean the machine after each use. 

Here are some important tips in maintaining a scrubber drier machine to keep its performance and functioning efficiently:

1. Clean the Recovery Tank

Always make sure to empty the dirty water tank after each cleaning. After emptying the tank, leave the drain hose in an open position on the floor to allow excess water to drain out. 

Next, rinse the tank with clean water to remove any residue left behind. This step is important to prevent sludge buildup in the tank, which can cause blockages in the drain hose. 

By performing this process regularly, you can keep the system clean and functioning properly.

2. Wipe the Squeegee Blades

Squeegee blades in a floor scrubber dryer are important components that function to collect and drain dirty water after the cleaning process.

You need to clean by wiping the squeegee blades with a damp rag, cloth, or hose to clean any build up from the front edge of the squeegee blade.

To do this, you need to first turn off the machine and unplug it from the power source to ensure your safety. 

After that, clean the area around the squeegee blades to avoid dirt that could interfere with the cleaning process.

If necessary, remove the squeegee blades from the machine according to the instructions in the user manual. 

Wash the blades with clean water to remove any remaining dirt, and dry the blades well afterwards before installing them back into the machine.

Also Read: “Vacuum Cleaner Buying Guide“

3. Check the Squeegee Blade

Next is to visually inspect the rubber squeegee blade on your floor squeegee blade.

Visually inspecting the rubber blade is done to ensure there are no cuts, tears, or excessive wear. A rubber squeegee that is in good condition will help keep your floors dry, clean, and safe.

To ensure maximum performance from your floor scrubber dryer, perform a thorough inspection on the rubber squeegee blades regularly. 

Rubber blades that are in top condition are essential, as they play a role in drying the floor effectively and leaving a clean and safe surface to use. 

By keeping the rubber blades in good condition, you will ensure that the machine functions efficiently and your floors remain optimal in terms of cleanliness and safety.

4. Charge the Batteries

Some scrubber dryers rely on batteries as their main source of power, that’s why taking good care and charging your scrubber dryer batteries is also essential in maintaining this equipment. 

It is advisable that you charge your scrubber dryer in a well ventilated area as the charging process usually generates heat.

The charging process is usually done overnight, you should charge the battery when your scrubber dryer’s batteries are fully discharged, and charge it until it is fully charged.

And it’s important to not use them for short periods and recharging for short periods as this will severely impair the battery life of your scrubber dryer.

5. Clean the Solution Filter

Whether they are walk-behind or ride-on, most scrubber-dryers contain a solution filter to prevent debris from the clean water tank from getting into the solution pipework and clogging it. 

Take off the solution filter and run it under the tap or in a sink to remove the residue.

So there you have it, the 5 tips on how to maintain floor scrubber dryers!

As good of a maintenance that you’ve done to your scrubber dryers, it is kinda useless if you do not choose a quality scrubber dryer.

The quality of the scrubber dryer really determines the life, and effectiveness of this equipment in maintaining the cleanliness of your home.

And on top of that, a quality scrubber dryer also will keep you safe during operation, as a quality scrubber dryer has already been tested for its quality or safety aspects.

One thing that you can spot in choosing a quality floor scrubber dryer is the presence of the SNI logo on it, as that means that the scrubber dryer has already been certified by the SNI certification.

The SNI certification itself is product approval applied in Indonesia to determine the safety and quality of many products before being sold and distributed in Indonesia.

Well, as for the standards of scrubber dryer itself, it is clearly stated in SNI IEC 60335-2-10:2012.