This is a new rule of testing samples for Mobile phone, WLAN, and Bluetooth technology. Please pay attention for following those new lab requirement before sending samples to DIMULTI to avoid any delays process.
Official statement letter has been release Yesterday, without any signed by officer but this new rule would be implemented by them starting next Monday March 23, 2015. Herewith the scanned copy of these new requirement. [Bahasa version]
Some important point in this requirement such as:
If the testing samples has external antenna connector, so the applicant have to provide RF cable and it has to be connected and glued with sealant.
If the testing samples has external antenna connector, so the applicant have to provide RF cable that soldered with internal antenna connector and please sealant it.
RF cable has specification such as >1GHz or appropriate with frequency range from the testing samples it self and using SMA male or female
We would like to inform new new rules for testing process. SDPPI lab just issued the new rules yesterday February 16, 2015. The new rules was signed by Head of SDPPI Lab.
Some of important point of new rules for testing telecommunication devices at SDPPI Lab as explained on the general requirement below:
1.1 Every applicants who has made the payment (test cost) and delivery of sample for testing / calibration shall be subject to the new rules
1.2 The test results are not in accordance with the technical reference (Indonesia’s standard), will not given the opportunity to repair / modify, further recapitulation of Test Results (RHU) / calibration is the final result.
1.3 Hours of service (in SDPPI Lab), to collect and delivery samples and the queue number for testing is 08: 00 – 13: 00
1.4 Taking place for the queue number for testing at the counter
1.5 Services performed would be based on the queue number
1.6 Dialling queue number would be performed by three (3) times. If the applicant does not exist, the applicant must be take a new queue number.
1.7 Testing or calibrations performed by Balai Besar Pengujian Perangkat Telekomunikasi (BBPPT) (SDPPI lab) maximum 17 (seventeen) working days.
These general requirements above would be affective after this new rules already signed by head of SDPPI Lab – Indonesia (February 16, 2015)
we do not have a chance to modify / repair of samples, SDPPI lab will issued the result based on the result in testing process and the test result would be sent by them to Evaluation team.
The official notice of the new rules for testing process at SDPPI lab as below:
Feel free to contact us for detail information about this notice.
We would like to share information about sample requirements especially for Mobile phone, WLAN and Bluetooth when we will submit samples to SDPPI lab for testing in the process of getting SDPPI approvals.
SDPPI New regulation said that SDPPI required 2 units sample for CPE categories and 1 units sample non CPE for testing need including supporting equipment of each units, written on Article 13, paragraph 1, #related to this regulation.
we would like to remind you that we have to provide 2 units sample for conducted mode for mobile phone, smart phone, mobile computer (which has cellular technology).
And we have to provide RF connector and cable with following specification:
Types ofHighRF > 1 GHz
This sample requirements has been running couple years ago.
Today [11-14-2014], SDPPI lab adding special requirement, They announced that all of WLAN and Bluetooth sample should be test for conducted mode too.
We have to provide samples with RF cable, RF test point and the RF test mode (Software) to avoid interference with other devices.
This notice already published and signed by Head of SDPPI Lab on November 14, 2014.
Especially for the mobile telephone, handheld computers, and tablet computers are required to attach a copy of the official letter from the authorities (or other similar institution) that lists the international mobile equipment identity (IMEI) for GSM, and mobile equipment identifier (MEID) for CDMA, written on Article 6, paragraph 3,
And and we have to provide 2 units of conducted samples for mobile telephone, handheld computers, and tablet computers, WLAN and Bluetooth for testing purpose.
Feel free to contact us, for more detail information
One of new regulation about type approval certification products (wireless radio and telecom) has been published couple week ago, this regulation will organize the certification procedures in Indonesia. This regulation will replace old regulation Number: 29/PER/M.KOMINFO/09/2008.
Some of important changes in this regulation such as:
Starting couple week ago, Indonesia will issued one types of certificate only. (no type A / type B certificate), written on Article 20, paragraph 2
Testing process will be in 3 classes in the near futures, written on Article 11
Especially for the mobile telephone, handheld computers, and tablet computers are required to attach a copy of the official letter from the authorities (or other similar institution) that lists the international mobile equipment identity (IMEI) for GSM, and mobile equipment identifier (MEID) for CDMA, written on Article 6, paragraph 3
Especially for Repeater / booster (Mobile communication system) and Satellite modem / satellite phone (Communication satellite system), are required to attached Letters cooperation agreement with one of Indonesian telecommunications operators, written on Article 6, paragraph 2, point i
Required 2 units sample for CPE categories and 1 units sample non CPE for testing need including supporting equipment of each units, written on Article 13, paragraph 1
Validation of certificate is three year and certificates can be renewed only one time, and renewal application must be submitted by the applicant 30 days before the expiration, written on Article 22, Article 25