Skip to content

Is testing on Indonesia SDPPI Approval Mandatory?

Is testing on Indonesia SDPPI Approval mandatory? With the application of new regulation and new system in SDPPI on early August 2018, now applicant can choose either proceeding their application through paperwork route, full in-country test, or doing partial paperwork (some test components using foreign lab’s test reports, while some other do local test).

testing on Indonesia SDPPI Approval Mandatory

In the case of doing testing in Authorized In-country Testing Lab, there are 6 Authorized In-Country Labs that are available for testing:

NoIn-Country Lab NameAddressTesting Scope
1Balai Besar Pengujian Perangkat Telekomunikasi (BBPPT), Direktorat Jenderal Sumber Daya dan Perangkat Pos dan InformatikaJalan Raya Tapos No. 46 Tapos, Depok 16457Electrical Safety, EMC, RF
2PT. Hyundai Calibration and Certification Technologies IndonesiaJalan Terusan I Gusti Ngurah Rai Nomor 10, RT.10/RW.11, Kel Pondok Kopi, Kec. Duren Sawit, Jakarta TimurRF, EMC, Electrical Safety
3Laboratorium PT. TUV Rheinland IndonesiaInfinia Park Blok A56, B92-93, JL. DR. Sahardjo No. 45 Jakarta 12850Electrical Safety (Leaked Current and Overvoltage)
4Laboratorium Penguji PT. Qualis IndonesiaJl. Pajajaran No.17 Desa Gandasari Kec. Jati Uwung Tangerang Banten 15137EMC, SRD, Bluetooth, WLAN 2.4 GHz, WLAN 5.8 GHz, RF
5Laboratorium Penguji PT. Hartono Istana Teknologi, Sub Lab Electronic & RFJL. KHR. ASNAWI PO. BOX 126, BAKALAN KRAPYAK, KALIWUNGU, KUDUS, JAWA TENGAH 59332RF
6Laboratorium Sentral Operasi Cibitung PT. Sucofindo (Persero)Jln. Arteri Tol Cibitung No 01 Cibitung Bekasi 17520Electrical Safety, Perangkat HF/VHF/UHF, Seluler (GSM, WCDMA, LTE), Receiver DVB-T2, Bluetooth, WLAN, Laser Safety
7Laboratorium Elektronika dan EMC Balai Besar Bahan dan Barang Teknik (B4T)Jl Sangkuriang No.14 Bandung, Jawa Barat 40135EMC, Electrical Safety, Seluler (GSM, WCDMA, LTE), Bluetooth, WLAN, SRD
8Laboratorium Pengujian PT. Bureau Veritas Consumer Products ServicesGedung KKM Lantai 3, Jalan Cideng Timur No. 38, Gambir Jakarta 10130 IndonesiaSeluler (GSM, WCDMA, LTE), Bluetooth, WLAN, Receiver DVB-T2, SRD, RF, Electrical Safety
9Laboratorium Penguji PT. Hartono Istana Teknologi, Sub Lab Electronic & RFJL. KHR. ASNAWI PO. BOX 126, BAKALAN KRAPYAK, KALIWUNGU, KUDUS, JAWA TENGAH 59332Seluler (GSM, WCDMA, LTE), Bluetooth, WLAN, Receiver DVB-T2, LPWA, Electrical safety
10Balai Standardisasi dan Pelayanan Jasa Industri (BSPJI)Jl. Jagir Wonokromo No. 360 Surabaya, Jawa Timur 60244EMC, Electrical safety

Beside doing full local test in local labs accredited by SDPPI, applicant can also opt to process SDPPI Approval through paperwork route. However, there are several requirements where paperwork can be accepted such as:

  1. Test Report used (RF, EMC, and electrical safety) must be issued by Overseas testing labs recognized by SDPPI. The list of recognized testing lab can be found in this link. However, this link may not be accessible in any areas. If this is not accessible, you can try accessing using VPN, or contact our handler in for further assistance.
  2.  All reports issued from April 1st, 2021, onward must be digitally signed by the lab. Please remember to use actual digital signature (example is in this link or this link or any other digital signature providers), not cropped picture of someone’s signature.
  3. RF reports are mandatory to be accompanied with Test Result summaries based on SDPPI’s format. If the reports are issued from July 4th, 2021, onward, this summary must be signed by the lab who issued the RF report. We will help you to arrange this summary.

Under some cases, applicant can also use combination of test reports from overseas test lab and test report from local Lab. For example, EMC and electrical safety reports are using overseas lab’s test report, while RF we use local lab test report (by doing local test). This method is called “Partial Paperwork” or “Combination, and it is also allowed in SDPPI. For more information about this, you may contact our contact windows in: .