How to Clean Electric Fan – After some period of time, the electric fan in your home will cling to dirt and let’s be honest, it looks very nasty.

And on top of that, the accumulation of dirt in your electric fan is also affecting its performance, as it can slow down the rotation of your fan’s blade.

So, with that concern above, you should properly maintain and clean your electric fan to get the full benefits of your fan without sacrificing it.

How to Clean Electric Fan

Step-by-Step Guide on How to Properly Clean an Electric Fan

The fan has the same function as an air conditioner as a room cooling device. However, the fan is much easier to maintain and clean than the air conditioner.

Cleaning the fan is actually not complicated, if you are still confused, follow these steps:

1. Turn Off and Unplug Your Fan

To clean any electronic appliance, it is important to ensure that it is off and not plugged into a power source.

This step is very important to avoid accidents that will harm, in addition, by unplugging it from the power source will also avoid damage that might occur to your electric fan.

So the first step is to turn off the fan, then make sure the cable of your device is unplugged.

2. Prepare the Equipments

When it comes to cleaning the fan, you will need some supporting equipment to ensure the cleaning process runs smoothly.

Prepare a screwdriver, cloth, soap, and a sponge or paintbrush to reach between the fan’s mesh and blades.

With these tools, you can clean the fan more effectively and thoroughly. Make sure all these tools are ready before you start cleaning the fan, okay?!

3. Disassemble the Wire Guard

The next step is to open the wire guard located at the front of the fan blades.

The wire guard design may vary depending on the fan manufacturer. Some models come with a wire guard design that is designed to ease the removal process, allowing you to remove it without additional tools.

However, in some other models, you may need to use specialized tools, such as a screwdriver, to open and remove the wire guard.

Make sure to check your fan’s user manual to determine the correct method according to the wire guard design.

Also Read: “SNI Certification for Electric Fans in Indonesia“

4. Clean the Wire Guard

Usually, there is accumulated dirt that sticks on the wire guard, you can clean it with a brush, or if the equipment supports, you can use a hair dryer or a blower to blow away the dirt.

But, if the dirt is thickly accumulated and kinda stubborn to be cleaned, a combination of water and soap and sponge would be needed.

After that, you can wipe it with a clean dry towel or cloth and let it dry thoroughly.

5. Clean the Blades

The next step in the process of cleaning the fan after the cover has been washed is to clean the blades. This component is the most important for you to clean.

To clean the blade, you don’t actually need to remove it, just do a wiping motion until this component looks very clean. You can use a wet cloth to clean it more deeply.

After wiping the fan thoroughly and it looks clean, wipe it again with a sterile dry cloth. Do the wiping motion again until the blade starts to look very clean. Then just wait until the remaining water on the blade completely dries out.

But, you might need to disassemble the fan blade if your blade is completely coated with dirt and needs a deeper cleaning.

Just make sure you go through the user’s manual to ensure that every part is disassembled properly to prevent damaging the fan.

6. Wipe the Remaining Body of Your Fan

After you have finished dealing with the wire guard and fan blade, do some cleaning in the body and fan head area as well. It is not uncommon for dust and dirt to stick to this area, especially if it is stuck in between.

Cleaning this area is also not that hard, you only need to use a wet cloth to effectively remove dirt and dust. Then continue by wiping it again with a dry cloth so that it quickly removes the remaining water from the wet cloth.

Also Read: “Parts of an Electric Fan“

7. Reassemble Your Fan

When all the components that you have cleaned appear to be dry, you can reassemble them by connecting one by one between the components until they are back to normal.

When finished, the fan is ready to work again with better performance!

There you go! The complete step-by-step guide on how to clean an electric fan!

The electric fan is one of the many products that are mandatory to be certified by the SNI certification in Indonesia.

This is because the risk of an electric fan might be concerning for the Indonesian consumers, as the fan that is not properly manufactured can cause a failure and be dangerous for the users.

The electric fan that is about to be distributed in Indonesia must undergo a series of tests to determine its quality and safety.

After all of those tests have passed and the electric fan is met with the requirements that have been set, the electric fan is ready to be distributed and sold in the Indonesian market.

For the electric fan and other household electrical devices, the regulation is clearly stated in SNI IEC 60335-1:2009.