5 Common Generator Problems and Their Solutions – Generators or gensets have become one of the vital devices that supports various sectors of our life.
Despite having a crucial role, the generator is not immune from a variety of problems that can interfere with its performance.
This article will discuss in depth the damage to the generators as well as the solutions or ways to deal with it.
Also Read
Knowing the potential problems that may arise and the appropriate precautions can not only extend the life of the generator, but also maintain the reliability of these backup power sources in various situations.
Damage to the generator can vary from engine problems to electrical components.
Here’s a complete explanation of the 5 most common generator problems tips on how to take care of it!
Table of Contents
What are the Most Common Generator Problems?
1. Clogged Fuel and Fuel Filter
Fuel contamination or the filter that is clogged can impede the flow of clean fuel to the generator, resulting in reduced performance and even damage to engine components.
To overcome this problem, it is essential to maintain the cleanliness of the fuel system by regularly cleaning and replacing the fuel filter.
In addition, make sure to use quality fuel to prevent contamination that may harm the health of the generator.
2. Weak or Damaged Battery
Inadequate power or damaged batteries can hinder the start-up process of the generator or even cause it to fail to operate.
To solve this problem, periodic battery condition checks, including voltage and capacity measurements, should be done.
Weak batteries should be replaced immediately to ensure that the generator is always ready for use when needed.
In addition, make sure that the battery connection is well taken care of and free from rust or dirt that can interfere with the electricity flow.
3. Overheating
Overheating a generator machine is a serious problem that can jeopardize the performance and reliability of the device.
An excessive increase in temperature can damage components of the machine and even cause permanent damage. In order to deal with overheating, it is important to take precautions on a regular basis.
Ensure the generator’s cooling system works optimally, by regularly cleaning the radiator and ensuring sufficient cooling fluid.
Also, check that there are no obstacles in the engine’s airways that can interfere with the air flow needed for cooling.
Also Read: “11 Ways of How to Maintain a Generator!“
4. Faulty in Alternator
A faulty alternator can cause instability in the power output, potentially damaging the equipment that relies on the power.
To solve this problem, perform a routine inspection of the generator, including wire and connector checks to ensure no damage.
If a problem is detected, call a technician immediately to make repairs or replace the defective component.
5. Generator and Cable
Damaged generators or worn-out cables can result in decreased efficiency and reliability of generators.
To address this problem, periodic inspections of the generators and cables should be carried out, looking for signs of wasting or physical damage.
Replace components that have already been damaged or exhausted, and ensure that all cable connections are secure and robust.
Ensuring the integrity of generators and cables will help keep the electricity flow from the
generator to the connected equipment smooth, preventing potential failures and further damage.
Also Read: “The Ultimate Generator Buying Guide“
There you have it! The 5 common generator problems!
In choosing the generators, make sure to look for the one with an SNI logo on it, as the generators with SNI logo on it, have been tested for its quality and safety.
The SNI itself is a product approval and certification to ensure that every product and service that are sold and distributed in Indonesia has already met the Indonesian standards and regulations.
Before being issued by the SNI certificate, those said products need to undergo a rigorous set of tests to determine its quality and safety aspect.
There are few items that are mandatory to be certified by the SNI certification as you can see HERE.
Other than that, the SNI certification also covers a lot of products in a lot of industries, ranging from automobiles to agriculture.
It is also recommended to put the SNI logo on your product aside from the mandatory list above.
So, as for business owners, having the SNI certification on your product can be so beneficial for your business.
The SNI certification can be used as a key selling point for your product, and it can also be used to boost the trust from the Indonesian market to your product.
If you’re interested in that subject, kindly check the info below!
- Address: Jl. H. M. Tohir Jl. Margonda No.15, Pondok Cina, Kecamatan Beji, Kota Depok, Jawa Barat 16424 (Google Maps)
- Phone Number: (021) 27843242
- E-Mail: info[at]narmadi[dot]com
