South Korea

Sample Requirements of South Korea Type Approval

Created: By DIMULTI

Sample Requirements of South Korea Type Approval

One of the frequently asked questions regarding Korea Type Approval is about sample requirements. No wonder because sample plays an important role in determining the success of an approval process. Especially for the country that obligates testing in the local laboratory, the suitability of the samples and type of testing is really important. Usually, sample requirement depends on the type of testing that will be conducted. This requirement will of course, follow the requirement of each testing type. So, we need to know what type of testing that will be performed there.

For South Korea Type approval, typically the telecommunication product applying for KC approval need to undergo RF and EMC testing. Besides, for some products that in its normal operation will be used close to or near the body, it will be mandatory to perform SAR testing too. Therefore, typically for one product that requires to do all those tests, we need to provide at least 3 types of samples: one conducted sample that will be used for RF test, one normal sample that will be used for EMC test, and one radiated sample that will be used for SAR test.

However, before shipping the sample to South Korea for local testing process there, we need to consult with the service provider about what samples are required for our product. Because in some cases, different product requires different sample setup. So, for more accurate judgement regarding what type of samples required by our product, consulting with the expert is highly recommended.

Understanding the Three Tests

For a product that needs all three tests, each one has a different purpose. The RF test checks the radio performance. The EMC test checks that the product does not disturb other devices, and is not disturbed by them. The SAR test checks the exposure when a product is used near the body.

Because the tests differ, the samples may differ too. A sample set for one test may not fit another. This is why the quantity needs to be confirmed.

Preparing a Sample Set

  • Confirm which tests your product needs.
  • Ask for the exact quantity and setup for each test.
  • Make sure the unit can be set to the required test modes.
  • Include the accessories, such as the battery or charger, when needed.

A complete set is better than sending several partial ones.

Talk Before You Ship

International shipping takes time and money. A short consultation before packing is cheap compared with a second shipment. So take a day to confirm, and the test can start as soon as the units arrive.

Keep a Record of the Samples

Write down what you send. Note the model, the number of units, and the setup of each one. If the lab has a question, you can answer with the record on hand.

This also helps the next time you apply for a similar product. You will not have to start from zero.

Why We Care

As informed earlier, knowing sample requirement in the early stage of approval process is very important. This rule is applied especially if we’re targeting approval certificate in the country that obligates local test. Such as South Korea for example, approval certificate can only be obtained if the applicant passes the test. In order to do that, the provided sample must align with the requirement for each testing. So, before we start to process South Korea Type Approval, we will surely make sure that the sample provided already comply with the requirements.

Get a quote

Tell us your product and target market.

One team for DJID approval, SNI certification and international type approval. We reply by email.