A Guide on How to Turn On a Generator

How to Turn On a Generator – In the fast-paced modern era, the genset has become one of the vital devices for many individuals and. 

Whether used as a backup source in an emergency or as a primary resource in a remote location, it’s important to understand how to turn the genset on properly. 

In this guide, dimulti.id will describe in detail the optimal way to turn on the genset, ensuring that you have the knowledge necessary to operate this machine efficiently and safely. 

For more information, check it down below!

How to Turn on a Generator?

Turning on a genset requires a proper set of steps to ensure that the operation runs smoothly and prevents damage from the genset and prolongs the usage of the genset. 

Here is a general guide on how to turn on the genset:

1. Take a Look at the Manual Book

The first step on how to turn the generator on is to check the manual instructions provided by the manufacturer. 

This manual contains very valuable information about how to operate the generator safely and efficiently. 

You should read and understand each instruction carefully before proceeding to the next step.

The manual instructions can also provide information about the necessary routine care, as well as the signs of danger that need to be noticed during use. 

Ignoring manual instructions can increase the risk of damage to the generator or even jeopardize your own safety.

2. Put Your Generator Outside

Before turning on the generator, make sure to place it outdoors or at least in a place that has good airflow. 

Operating it indoors can cause accumulation of toxic gasses such as carbon monoxide, which is very dangerous to your health. 

Ensure that the generator is placed away from fuel and other flammable materials and away from areas that may interfere with the air flow required for cooling. 

This will ensure that the generator can operate safely and efficiently without endangering the surrounding environment.

3. Use the Appropriate Fuel

One key step before turning on the genset is to make sure that the appropriate fuel has been filled into the tank. 

Be sure to use the type of fuel recommended by your genset manufacturer, as improper use of the fuel can result in poor performance or even permanent damage to the engine. 

Also, be sure not to fill the fuel tank too full, as this can cause the fuel to spill and risk you and your property’s safety. 

Filling the fuel carefully and appropriately will ensure that your generator is ready to operate optimally when needed.

Also Read: “A Guide on How to Shut Off a Generator Properly“

4. Check if There Any Leaks and Damage

Before turning on the generator, it’s important to check for leaks or damage to vital parts such as the fuel hose, airways, and other parts of the engine. 

An undetected leak or damage can lead to an operational failure or even a serious accident. Also check all connectors and cables to make sure that nothing is broken. 

5. Check the Engine Oil Level

Before starting the generator, make sure to check the existing engine oil level in optimal condition. 

A sufficient and good quality engine oil is essential to maintain good engine performance and prevent excessive wear. 

Also check if there are any signs of changes in the oil, such as a change in color or the presence of particles. 

If there are any suspicious signs, replace the oil immediately before operating the generator.

Regularly checking the engine oil levels is an important step in the preventive care of your generator, which can help extend its life and keep its performance in optimal condition.

So that’s how to turn on a generator and ensure the safety of you and also your generators!

In choosing the generators, make sure to look for the one with an SNI logo on it, as the generators with SNI logo on it, have been tested for its quality and safety.

The SNI itself is a product approval and certification to ensure that every product and service that are sold and distributed in Indonesia has already met the Indonesian standards and regulations.

Before being issued by the SNI certificate, those said products need to undergo a rigorous set of tests to determine its quality and safety aspect.

There are few items that are mandatory to be certified by the SNI certification as you can see HERE.

Other than that, the SNI certification also covers a lot of products in a lot of industries, ranging from automobiles to agriculture.

It is also recommended to put the SNI logo on your product aside from the mandatory list above.

So, as for business owners, having the SNI certification on your product can be so beneficial for your business.

The SNI certification can be used as a key selling point for your product, and it can also be used to boost the trust from the Indonesian market to your product.

If you’re interested in that subject, kindly check the info below!

• Address: Jl. H. M. Tohir Jl. Margonda No.15, Pondok Cina, Kecamatan Beji, Kota Depok, Jawa Barat 16424 (Google Maps)
• Phone Number: (021) 27843242
• E-Mail: info[at]narmadi[dot]com