Saudi Arabia Type Approval can be obtained through paperwork method. This means that the approval process in this country relies fully on the documents. Due to that reason, we must check the completeness of the product documentations prior to the submission process. Besides, we also need to check whether these available documents suffice the document requirements in the Saudi Arabia or not.
By doing thorough checking, it will be useful to reduce the risk of getting rejection. This is important o keep the approval process running on track. So, the certificate can be issued according to the target. In order to give you reference of required documents for Saudi Arabia Type Approval process, here is the list of documents that must be provided:
- Safety, EMC, RF test reports issued by accredited test laboratory. The test report should be within 3 years from its issuance date, the older reports are not accepted.
- Declaration of conformity (DOC)
- Internal & external photos of the product
- User manual
- Datasheet of the product
- Risk analysis and ROHS declaration (draft will be prepared us)
- Application form (draft will be prepared us)
Why We Care
As mentioned earlier, document is important aspect in doing Saudi Arabia Type Approval. The success of this approval depends on the availability of required documents. That’s why we have to prepare the documents thoroughly to avoid unnecessary rejection. In Dimulti, we are fully aware of this. Before sending the documents to Saudi authority, we will guide you to prepare the documents and to complete the required forms. Once the documents are completed and checked, we will continue to submission. Therefore, compliance certificate can be issued timely according to your schedule.