You can check if there’s a clogged drain hose, check the water inlet valve and evaluate your load size if your washing machine rinse cycle is not working.
The rinse cycle is a crucial part of the laundering cycle to remove any excess detergent and ensure your laundry feels and smells clean.
Your clothes might come out soapy, sticky or just not as fresh as they should be if your rinse cycle is troubled.
Also Read
So, you can do these steps that we’ll provide you through this article if your washing machine rinse cycle is not working!
Table of Contents
Do This If Your Washing Machine Rinse Cycle Is Not Working
1. Clogged Drain Hose
A clogged drain hose is one thing that might happen to any type of washing machine, even in a high efficiency washer that uses much less water compared to regular washers.
If the water isn’t draining out properly, it’ll disrupt or completely prevent the rinse cycle from running or completing.
Check the drain hose by unplugging your washer first and remove it (it usually located at the back of your washer), and check for any visible blockages.
And in addition to that, make sure that the hose isn’t kinked or twisted as it can also restrict water flow.
Another thing you can do is to inspect the pump filter. Most front-loading washers are equipped with a pump filter that is located near the bottom of the unit.
It is best to check your user manual book for its location and clean it out if it’s clogged with debris or small items.
2. Evaluating the Load Sizes
Most washing machines, whether it’s the high efficiency washers or regular ones, have a load limit for every cleaning cycle.
Overloading your washers can cause it to struggle to spin or run in general as there’s not enough space for the water to move the clothes properly, which in turn affects the rinsing.
Every single washer has different recommended load size, and the best thing to do is to check the user guide book for recommended load sizes (or just Google it, it’s 21st century anyway).
With that being said, make sure you’re not exceeding the recommended load sizes. But if you’re too busy to check it (which you’re not), the general rule of thumb is try to fill the drum only about three-quarters full to leave enough space for the water to circulate around and rinse your clothes effectively.
And, another thing you can do is to redistribute the load if you want to clean a heavy item such as blankets that could be throwing your washers off balance and prevent your washer from spinning properly.
3. Checking the Water Inlet Valve
The water inlet valve can be the culprit if your washing machine rinse cycle is not working properly.
To address this, turn off the water supply and unplug your washers, then locate the water inlet valve that can usually be found at the back of your washers.
Disconnect the hose and inspect the filter screens inside for any build up of dirt or mineral deposits. If there’s any, you can simply clean it off.
However, if the problem persists even after you clean the valve, you might need to replace it with a new one.
So there you have it! A guide on what to do if your washing machine rinse cycle is not working as it should be!
In addition to that, some of today’s washers have a feature called cleaning cycle which allows you to clean the drums of your washers.
You can also run an empty cycle with hot water and vinegar or specialized washing machine cleaner at least once a month.
