Is your washing machine not filling with water? Well, there are a few common reasons why that’s happening such as faulty water inlet valves, blocked hoses, or the worst is the problems with your washer’s control board!
We all know it’s frustrating when you’re loading your laundry to the washers only to find out that it’s not filling with water.
Whether you’re using a regular washer that uses more water, or a high efficiency washer that uses less, without water, your laundry simply won’t get clean, and the whole laundry process will be disrupted.
Also Read
So, with that in mind, today we will look at some of the common reasons why your washing machine is not filling with water, and of course we’ll give you the steps to resolve the problem too.
Table of Contents
Reasons Why Your Washing Machine Not Filling With Water
There are several common reasons why your washing machine is not filling with water. These are the most common reasons:
1. Blocked or Kinked Inlet Hose
If the hoses connecting your machine to the water supply are kinked, clogged, or bent. It surely will prevent the water from filling your washer.
To identify this, turn off your water supply and unplug the machine, then you can inspect the inlet hoses or straighten it out if there’s any kinds or bends that could be blocking the water flow.
If that’s not work, you can detach your hoses from the back of your machine and water taps and inspect it if there’s any debris or blockage and clear them out if needed.
The filter inside the hose connections is also one thing to consider, clean them gently if they’re dirty.
Some things you can do to prevent this is to check and inspect the hoses every few months to notice for kinks, leaks and general wear and tear. And if your hoses are severely damaged, it’s best to replace it with a new one.
2. Water Supply Issues
Sometimes, the problem isn’t coming from your washer at all but with the water supply. If the water pressure is too low or the taps are off, the washer won’t fill.
Make sure the water taps are fully turned on, yes, it might be easy to overlook, but sometimes the solution is as simple as that. Make sure that both of the hot and cold water taps are turned all the way on.
If the problem persists, you can check if there’s any interruptions on your water supply such as the water pressure is too low. Check it by running water from a nearby tap to see whether the waterflow is consistent.
Contact your water supply if there’s a problem.
3. Faulty Water Inlet Valve
The inlet valve is the part that functions to control the water entering the machine. If it’s broken or malfunctioning, your washer won’t fill up.
You can check it by first locating the water inlet valve that is usually found at the back of your washing machines where the hoses connect.
Disconnect the hoses and spot the valve’s filter screens, you can clean them if necessary if you find debris or mineral build-up.
Again, if the problem persists, you can test the valve for continuity, use a multimeter to check for continuity, if there isn’t any, you need to replace the valve.
However, if you’re not comfortable doing this, consider calling a professional to do it for you!
4. Your Washer’s Control Board
This is the worst that you can get, the control board functions to send signals to the various components of your washers. If it is not working properly, it might not be able to instruct the washers to fill with water.
If there’s a problem with your washer’s control board or other electrical issues such as wiring and sensors, it is best to call a trained technician to inspect and fix the problem.
Why? Because attempting to fix electrical components by yourself can be risky, and might void your warranty.
Well, there you have it! The reason why your washing machine is not filling up with water!
