How to improve the suction power of your water pump? There are several tips such as changing the RPM of your water pump’s motor, adjusting the water pipes and many among others!
Have you ever felt upset when a water pump machine at home or at work can’t pull the water more quickly? Do you know how to increase the proper suction power of the water pump?
Generally speaking, a water pump machine works by pulling water from its source, whether it’s a well, a drain, or a reservoir, and pushing it in the desired direction, such as a storage tank or a distribution system.
Also Read
However, sometimes, the suction power of the water pump pump machine can be affected by a variety of factors leading to less optimal performance.
Moreover, when the suction power is reduced, the water pump machine will work harder thus increasing excessive energy consumption and the risk of damage to the engine components.
So how is it to improve the suction power of your water pump? Take a look at the explanation that dimulti has prepared just for you!
Table of Contents
How to Increase the Suction Power of Your Water Pump?
1. Reducing the Vacuum Space
Reducing the vacuum space around your water pump is the first thing you can do to increase the suction power of your water pump.
To do this, you should make sure that the bottom of the sucking pipe and its connections are tight without air leakage.
If there is a too wide vacuum compartment, add a proper seal or sealing material to the pipe connections to help prevent unwanted air from entering and can increase the suction power of a water pump machine.
2. Changing the Machine’s RPM
Optimizing the engine speed according to the water needs can also help in improving the suction power of the water pump machine.
However, bear in mind that the speed changes must be in line with the engine limits and specifications so that they do not cause new problems later on.
Proper speed adjustment will help you ensure that the pump works in optimal conditions without exceeding the specified limit.
3. Adjusting the Pipes
An optimal water pipe layout is an important factor in improving the suction power of a water pump machine.
Therefore, make sure your water pipes do not have sharp bends or deep drops as they can cause a decreased water flow.
If you feel that your water pumps suction force inconsistent, try to reset the water piping to minimize the water flow’s difficulty and improve the water pump engine efficiency.
Also Read: “Components of Water Pump“
4. Adjust the Distance Between Water and The Water Pump
The next is a common solution that is often used if the water suction power is reduced, which is by adjusting the water distance from the pump.
Ensuring that the water source and the pump are properly distanced will be very helpful in optimizing the pumping power of the engine.
Pumps that are too far away from the source may have difficulty drawing water efficiently. For that, an optimal positioning will reduce the pump effort in drawing water so that it can improve overall suction power.
5. Fix or Accelerate the Dynamo Rotation
Maintaining the engine’s dynamos in optimal condition is also an important key to improving the suction power of the water pump machine.
Therefore, be sure to perform regular inspections of the dynamos, including checking the switch, the carbon brush, and other necessary components.
Fixing or accelerating the rotation of the dynamo according to the specification will be very helpful in improving the performance of the water pump engine.
6. Routine Maintenance
The last step and the most important solution is to undertake periodic maintenance. In this case, you can clean the impeller from dirt or dirt that can reduce the suction power of your water pump.
In addition, check the suction pipes and connections to make sure there is no leakage. This periodic maintenance will help you maintain the suction power of the water pump machine, prevent more serious problems, and increase the overall lifespan of the machine.
So there you have it, the tips on how to increase the suction power of your water pump!
Like many other things that are being distributed and sold in Indonesia, a water pump is one of the things that needs to be certified by the SNI certification.
The SNI certification is a type of product approval that regulates the safety and quality aspects of a product.
The product that is about to be certified by the SNI certification needs to undergo a series of tests to ensure and determine its quality and safety.
While giving the benefits to the customers of Indonesia a peace of mind knowing that the product they bought has already been tested, the SNI certification also comes with a lot of benefits for business owners alike.
The presence of the SNI logo on your product will boost the trust from the Indonesian market, thus improving your integrity and your business’ position.
