High-efficiency vs regular washers, from their appearance alone, we can really spot the difference between those two. A high efficiency washer most likely doesn’t have a tall agitator to spin and wash the laundry.
But, aside from that we stated above, what else are the differences between high-efficiency vs regular washers? Let’s find out in our article down below!
Table of Contents
High-Efficiency Vs Regular Washers
1. Key Features
The first one is their key features, high-efficiency washers use a different washing system that is traditional counterparts.
Also Read
While the regular washers use a tall agitator in the middle of the tub, a high-efficiency washer, especially that of front-loader type, uses gentle rotating tumbling action to get the clothes clean.
With that being said, because it has no agitator in its tub, a HE washer can tackle more load in one cleaning cycle.
However, there is also a high-efficiency washer with a top loader. Its washing mechanism is also quite unique and different, too.
A top loader high-efficiency washer has a shorter agitator that is usually shaped like a disk to clean clothes with less water.
2. Appearance
Like we stated above in the intro, a HE washer is divided by 2 models, which are the front-loading and top-loading, although they’re best known as front-loading appliances.
On the other hand, there are no front-loading models for traditional washers.
3. Sizes
Both HE and traditional washers come in a variety of sizes and capacities. The only difference is you may find that the top loaders are a little bit taller and wider than the front-loader.
4. Repair and Maintenance
The biggest downside of using a high-efficiency washer is that it needs more care than a basic water.
A HE washer is more prone to mildew since it uses lower water level that might cause the washers to not flush the soap and wash load residue properly.
One thing to prevent this is to open the door and dispenser on a HE washer in order for the door gasket and the interior of the drum to dry properly.
And in addition to that, a HE washer needs to run a regular cleaning cycle recommended by the manufacturer to maintain its cleanliness and reduce the risk of bacterial growth.
You can also lower the detergent use and/or choose not to use liquid softener in the washer to prevent those issues.
On the other hand, a standard washer is much easier to maintain as it doesn’t require as much daily care as a HE washer.
One thing to keep in mind is not to overload a top-loading regular washer as it can cause the drum to wobble or even stop spinning.
5. Wear and Tear on Clothing
A high-efficiency washer will clean your clothes without damaging it because it uses a gentle washing mechanism.
On top of that, most HE washers also have sensors to adjust water temperature, level and spin to match the load.
On the other hand, because it used an agitator to rotate the clothing clockwise and counterclockwise, a traditional washer might be rougher on your clothes.
6. Water and Energy Use
There’s a reason why a high-efficiency washer is called a “high-efficiency washer. A lower water means less water to heat which in turn means less energy use. That is why HE washers are more efficient in terms of water and energy use.
There you have it! High-efficiency vs regular washers that we’ve summarized just for you! High-efficiency washers offer several advantages over traditional washers, including a gentler cleaning process, larger load capacities, and better water and energy efficiency.
However, they require more maintenance and care to prevent issues like mildew, which can be avoided by following proper cleaning routines.
Traditional washers, while simpler and easier to maintain, tend to be rougher on clothes and less efficient in terms of water and energy use.
Ultimately, the choice between the two depends your individual preferences for efficiency, convenience, and maintenance requirements.
